GJS-SP03A The strong housing provide fire resistant, anti-aging,waterproof,anti-UV and quakeproof while protecting splices during pulling, torsining and impacting. Used to directly connect or splice optic cable fibers, in aerial, underground, direct buried, wall-mounting, hand hole and duct mounting application. Mounted on a pole, wall or a strand.
Model
Trays
Tray capacity
Total Capacity
(fibers)
Dimension
(max point)
Cable Entry and available cable dia.
Raw material
GJS-SP03A
6
24c
144c
513*189.8mm
1 oval port for 2pcs10~25mm cable.
4 round ports for 6~19mm cable
Dome & base :
Modified P.P
Tray: ABS
Application:
It can be installed in aerial locations, ducted applications, direct buried, manholes. Small volume but large capacity.
Features: 1. Excessive fibers can be stored in storage baskets. Easy in fiber management. 2. Fabricated by mixing the imported material and other chemical assistant agent (ageing resistance & ultraviolet radiation resistance), increase of service life 3. Base-to-dome seals on FOSC are mechanical and heat-shrinkable for ease of installation and reentry. No other sealing adhesive tape is needed 4. The splice trays are hinged for access to any splice without disturbing others trays 5. The inner parts and fixing parts are made of 304 stainless steel
6. FOSC with a earthling device protect it from damage by lightning
Technical Parameter: 1. Working Temperature: -40 degrees centigrade~+70 degrees centigrade 2. Atmospheric Pressure: 70~150Kpa 3. Axial Tension: >2000N/1min 4. Stretching Resistance: 2500N/10 square centimetre(1min) 5. Insulation resistance: >2*104MΩ 6. Voltage Strength: 15KV/1min, no arcover or breakdown 7. Pressure in the water: 50m/72hours 8. Splice tray with optical taking-in radius≥ 40mm. Low optical loss.